The very requirement of installing curtains in unconventional ways, i.e. without a rod is quite a common concern, especially when one lives in a rental place or in some other temporary settings. You want a dedicated window treatment but cannot employ a pole or rod for some reason or simply don’t want to drill (and damage) your walls. We are here with the aid!
Though seemingly challenging, pulling off curtain hanging without curtain rods is very easy and totally achievable, particularly when you have Fixit Design to the rescue. We have prepared a precise and practical guide about fitting window, door or partition curtains without employing a rod or pole. This DIY activity is both fun and favorable in a range of scenarios.
Rod-free Curtain Installation Methods
All the following methods are convenient to act upon, hassle-free and budget-friendly as well. Additionally, they won’t take a toll on the walls because you don’t have to do any kind of (troublesome) drilling and can still flaunt your desired curtains in Dubai.
1- Adhesive Hooks
The first method on our list is the use of adhesive hooks which are greatly versatile and work for a vast number of situations. They are sturdy and heavy-duty with a self-adhesive design which can be quickly attached to any surface for hanging drapes.
You can also find versions with designs for holding curtain rods, which means you can install your rod or pole without making holes in walls. Additionally, they come with different weight capacities too, offering the flexibility to utilize heavier coverings too, like blackout curtains.
2- Command Hooks
The structure of command hooks is somewhat the same as that of the adhesive ones. They feature pull-off strips which make removal easy and trouble-free without the slightest damage to the wall. In addition, they have quite an efficient grip and can be used for all kinds of curtains.
We suggest using multiple command hooks in case of wider curtains and of course, wider windows or doors. This will ensure even weight distribution and no likelihood of curtains falling or getting dislocated. You can also use them for dividing spaces in open-plan areas or lounges.
3- Tap-in Brackets
Tap-in brackets have small nails that are to be hammered into the trim of window frames, often the topmost parts. You can also tap them with the help of a mallet and their brackets will get locked into position, after which you can hang your curtain rod on their cradle or hook.
While tap-in brackets are technically meant to be used with slotted standards, they can, however, be used on wooden window frames too. The biggest advantage of using these brackets is that affixing them takes little to no time and the removal is easy and damage-free as well.
4- Velcro Strips
This approach needs a bit of preparation in advance to the setup, essentially sewing of the velcro strips, but that mostly happens when you are going to use heavier curtains and/or need to adjust them frequently. It is recommended to invest in heavy-duty velcro strips for the best outcomes.
The method is quite straightforward; you just need to attach one side of the velcro strip(s) to the topmost edge of your curtain panel by peeling off its adhesive backing. The other one will go on the wall or the window frame. Lastly, carefully align and firmly press the two together for some time.
5- Rings & Rope
This idea is free of both expenses and struggles and is the best approach if you are into industrial decors or Boho aesthetics. There is practically no equipment needed either, just two nails or hooks and a rope (natural fiber ones work best!) or a wire sturdy enough to hold your curtains.
The most foolproof version is to use rings with clips. In case of curtains with built-in loops, grommets or eyelets, you can use rings with hooks. Afterwards, tie and secure your rope or wire to both the mounting points and finish off by sliding your curtain rings onto the rope, followed by arranging the curtains.
Make Your No-Rod Curtain Installations Successful With These Useful Hacks
This bonus advice will help make your rod-free curtain setups last long.
- Mark points after taking area measurements for the even and well-aligned installation of hooks or brackets. This will ensure that the supporting hardware goes in the right place and the curtains appear tidy. A level can be greatly beneficial in this regard.
- Whichever product you use to hang your curtains, check out its weight bearing capacity beforehand and never use drapes that are excessively heavy. This will simply fail the entire setup and lead to plenty of nuisance.
- Always clean the wall or window frame surface before attaching any and every supporting hardware for curtains. Using rubbing alcohol is an excellent way to make the area free of all the grime and dust. Let the area get fully dry before affixing the hardware.
- In case of adhesive-backed hardware, such as hooks or strips, ensure enough curing time as directed by the manufacturer. This will ensure proper and long-lasting securing of the hardware, and by extension, of the curtains.
- No-rod curtain setups don’t have to be boring or unsightly. So do look for options that go well with both your curtains and the surrounding decor. Use wall anchors when mounting into drywalls for maximum support and agreeable results.
Final Thoughts
Even if you don’t really need to hang curtains without rods, learning how to make such arrangements can prove incredibly beneficial in many different circumstances, specifically when you have to make things work without having a lot to work with. Besides, this will ensure the fact that there are absolutely no compromises over your privacy or peace of mind. In addition, the hacks and methods that we have mentioned, given by the Best interior design companies in Dubai, work great for room or area partitions too, and you can easily and inexpensively adjust a space as per your requirements.